Konica Minolta bizhub 222 - Manual (Page 262)

Utility mode 10
362/350/282/250/222/200 10-79
Utility mode
Chapter 10
Specifying settings for the confirmation screen for broadcast
transmissions (mode 014)
Specify whether or not a screen asking for confirmation of the settings is dis-
played before a broadcast transmission.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 1 (HEX: 01)
Bit Description Setting Description Page Refer-
ence
7, 6, 5, 4, 3,
2 ----------------------- 000000 *Do not change these bits
when specifying settings
for this function. ----------
1, 0 Specifies whether or
not a screen asking
for confirmation of
the settings is dis-
played before a
broadcast transmis-
sion. 00 Does not display the set-
ting confirmation screen. p. 2-26
01 Displays the setting con-
firmation screen before a
broadcast transmission.
10 Normally displays the
setting confirmation
screen, regardless of
whether a broadcast
transmission is being per-
formed.
00 *Do not specify this set-
ting for this function.