Konica Minolta bizhub 222 - Manual (Page 192)

Utility mode 10
362/350/282/250/222/200 10-9
Utility mode
Chapter 10
10.2 Specifying User’s Choice settings
From the User’s Choice screens, the default settings (settings selected when
the machine is turned on) can be specified.
The following procedure describes how to display the User’s Choice screens
and specify their settings.
2
Reminder
If the [Utility/Counter] key was pressed to register items and specify set-
tings, be sure to press the [Reset] key in the control panel after returning
to the standby screen (initial screen).
To specify User’s Choice settings
1
Press the [Utility/Counter] key.
The Utility/Counter screen appears.
2
Touch [User Setting].
3
Touch [User’s Choice].
The User’s Choice
screen appears.