Konica Minolta bizhub 222 - Manual (Page 265)

10 Utility mode
10-82 362/350/282/250/222/200
Utility mode
Chapter 10
Specifying settings for the image in the results report (Mode 023)
Specify whether or not an image of the transmitted document is added to the
results report.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 1 1 1 1 1 0 0 0 (HEX: F8)
Bit Description Setting Description Page Refer-
ence
7, 6, 5, 4 ----------------------- 1111 *Do not change these bits
when specifying settings
for this function. ----------
3 Specifies whether or
not an image of the
transmitted docu-
ment is added to the
results report. 0 Is not added p. 6-10
1 Is added
2, 1, 0 ----------------------- 000 *Do not change these bits
when specifying settings
for this function. ----------