5 displaying the administrator management screen, To display the administrator management screen, Displaying the administrator management screen -15 – Konica Minolta bizhub 222 User Manual
Page 198: To display the administrator management screen -15
Utility mode
10
362/350/282/250/222/200
10-15
Utility mode
Chapter 10
10.5
Displaying the Administrator Management screen
In order to change Administrator Management settings, display the Adminis-
trator Management screen.
2
Reminder
If the [Utility/Counter] key was pressed to register items and specify set-
tings, be sure to press the [Reset] key in the control panel after returning
to the standby screen (initial screen).
To display the Administrator Management screen
1
Press the [Utility/Counter] key.
The Utility/Counter screen appears.
2
Touch [Admin. Manage-
ment].
The Administrator Code
screen appears.
3
Use the keypad to type
in the 8-digit administra-
tor access code, and
then touch [Enter].
–
To change the en-
tered value, press
the [C] (clear) key,
and then enter the
correct value.
–
To cancel the opera-
tion, touch [Cancel].
The Administrator Management screen appears.