Konica Minolta bizhub 222 - Manual (Page 77)

2 Transmission
2-34 362/350/282/250/222/200
T
ran
sm
iss
ion
Chapter 2
2.9 Operations while scanning
If document size cannot be detected
If the size of the document cannot be detected, the document cannot be
scanned.
If this occurs, touch [Reduction/Area], then [Original Size Set.], and then
specify the size.
!
Detail
For details on the settings available on the Quality & Reduction screen,
refer to “Specifying the transmission settings” on page 2-9.
If memory became full
If many documents are stored in the memory (“Memory Free” is nearly 0%),
it may not be possible to send the fax. In addition, if the document contains
many pages or if the data is large, such as when the document contains
many fine details, the memory may become full and the fax cannot be sent.
If this occurs, clear some of the memory or send the “Quick Scan TX” func-
tion.
!
Detail
For details on the “Quick Scan TX” function, refer to “Sending a docu-
ment one page at a time (“Quick Scan TX” function)” on page 6-21.
2
Note
If the fax could not be sent, you can send it again since it remains in the
memory. This data can be deleted to clear some of the memory.