HID HDPii Plus User Guide 2.0 - Manual (Page 91)

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
December 2012 Page 91 of 103
© 2012 HID Global Corporation. All rights reserved.
Step Procedure
11 Save this template using File > Save.
Close the Workbench. ( Note: Any Software
program file printed with the YMCFK ribbon
installed into the printer will print this design
with the F panel of the ribbon. It will print the
same file each time unless you recreate a new
template.)
12 Set the ribbon for YMCFK in the Printing
Preferences. ( Note: In addition, use the Auto
Detect button. Install the F panel ribbon for this
process to work.)
13 Check Dual Pass for printing the F panel on a
separate InTM Film panel from the YMC image.
( Note: Use the default Dual Pass option if
using the fluorescent image in places where
also using other dye, or any time selecting the
Invert F-panel Image.)
14 Check Invert F-Panel Image to create a
negative of the fluorescent image. ( Note: This
may improve the look of the person’s image if
used for the Logo.)