HID HDPii Plus User Guide 2.0 - Manual (Page 28)

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
Page 28 of 103 December 2012
© 2012 HID Global Corporation. All rights reserved
3.7.3 Using the Print Left of Form Setting
From Advanced Settings, modify the Print Left of Form Setting.
Step Procedure
1 Print the Alignment Card Self-test.
2 Adjust the Print LOF up or down until the border of the LOF Zero Line is showing on the edge of
the card as shown.
3 Measure the density square, as shown.
Adjust the image density to 65% ± 1%.