HID HDPii Plus User Guide 2.0 - Manual (Page 12)

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
Page 12 of 103 December 2012
© 2012 HID Global Corporation. All rights reserved
Term Description
Overlaminate Options All overlaminate options are available in either clear, holographic globe
design or custom holographic design. They can also be optimized for
use with smart cards and Magnetic Stripes.
Here are the options:
• Thermal Transfer Overlaminate, .25 mil thick, 500 prints
• PolyGuard® Overlaminate, 1.0 mil and .6 mil thick, 250 prints,
(clear, standard holographic and custom holographic)
Print Area Over-the-edge on CR-80 cards.
Printing Method HDP™ Dye-Sublimation / Resin Thermal Transfer
Print Ribbon Options (Prints or Images):
• YMC, 750 prints
• YMCK* 500 prints
• YMCKK* 500 prints
• YMCKH* 500 prints
• YMCFK, 500 prints
• YMCKI, 500 prints
• YMCIKH, 375 prints
• YMCKIKI, 375 prints
• YMCK Half panel, 1000 prints
• YMCKK Half Panel, 750 prints
• Premium Black Resin (K) 3000 prints
*Indicates the Ribbon type and the number of Ribbon panels printed
where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, H=Heat Seal,
I=Inhibit, and F=Fluorescing
Resin Scramble Option The system can hide any information printed with the resin panel.