HID HDPii Plus User Guide 2.0 - Manual (Page 7)

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
December 2012 Page 7 of 103
© 2012 HID Global Corporation. All rights reserved.
1.2 Safety Messages (review carefully)
Symbol Critical Instructions for Safety purposes
Failure to follow these guidelines results in personal injury or death.
To prevent personal injury or death:
• Reference the following safety messages before performing an operation.
• Always remove the power cord prior to performing repair procedures,
unless otherwise specified.
• Ensure only qualified personnel perform these procedures.
This device is electro statically sensitive. You may damage the device if
exposing it to static electricity discharges.
To prevent damage:
• Reference the following safety messages before performing an
operation.
• Observe all established Electrostatic Discharge (ESD) procedures
while handling cables in or near the Circuit Board and Printhead
Assemblies.
• Always wear an appropriate personal grounding device.
• Always remove the Ribbon and Cards from the Printer before making
any repairs, unless otherwise specified.
• Remove jewelry and thoroughly clean hands before working on the
Printer.
This symbol warns of an electrical hazard that could result in personal injury or
death.
For safety purposes, do not use Ethernet for a direct connection outside of the
building.