HID HDPii Plus User Guide 2.0 - Manual (Page 83)

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
December 2012 Page 83 of 103
© 2012 HID Global Corporation. All rights reserved.
7.2.2 Cleaning inside the Printer
Step Procedure
1 Open the Front Cover.
2 Remove the Print Ribbon and InTM Film from the Printer.
3 With compressed air, blow out all visible areas of the Printer interior removing debris.
OR
If you do not have a can of compressed air, use a cleaning pad from the Printer Cleaning Kit to wipe
out all visible areas inside the Printer. ( Note: Remove any debris that may be inside.)
CAUTION: Use extreme caution not to let any alcohol drip inside the Printer!
4 Re-install the printing supplies.
5 Close the Front Cover.
7.2.3 Cleaning outside the Printer
Step Procedure
1 The Printer has a durable casing that should retain its luster and appearance for many years.
Clean it only with a Cleaning Pad from the Printer Cleaning Kit.
CAUTION: Do not use cleaning solvents of any kind or spray the printer with a
cleaner!