HID HDPii Plus User Guide 2.0 - Manual (Page 101)

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
December 2012 Page 101 of 103
© 2012 HID Global Corporation. All rights reserved.
12 Appendix A: HDPii plus
This section only pertains to the HDPii plus.
Dimensions HDPii plus: 11.50"H x 12.25"W x 9.25"D / 292mmH x 313mmW x 235mmD
HDPii plus + Dual-Sided Module:
11.50"H x 25.00"W x 9.25"D / 292mmH x 626mmW x 235mmD
12.1 Accessory Procedures - Using the Security Lock Slot
Important: Compatible locks are not sold by HID Global; however, they are readily available
from computer stores.
The HDPii Printer has a Security Lock Slot located in the back lip of the metal chassis to
accommodate a standard laptop security lock.
To prevent unauthorized removal of the HDPii, attach an industry standard security cable to an
immovable object and then lock the cable to the Security Lock Slot. (Note: HID Global does
not sell any type of locking device, but provides this feature for your added security.)
The lock slot has a plastic covering that needs to be penetrated by the lock. (Note: Simply
push the lock end into the slot with adequate force to break the protective film.)
Follow the locking procedure recommended by the lock vendor.