HID HDPii Plus User Guide 2.0 - Manual (Page 46)

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
Page 46 of 103 December 2012
© 2012 HID Global Corporation. All rights reserved
3.10.3 Using the Advanced Image Color window
Step Procedure
1 Click Advanced Settings to bring up the Advanced Image Color window.
2 Click OK to accept any variance from the default (for this specific slider bar) and return to the Image
Color tab window.
Click
Cancel to negate any variance on the slide and return to the Image Color tab window.
Click Default to clear changes back to the default settings for this window only.
In addition, here are further instructions:
Sharpness (Default, 0%): Move the slide to the left for (-) or less sharpness. Move the slide to the
right (+) or more sharpness of the printed image. Study the image (on the right) to determine correct
sharpness.
Contrast (Default, 0%): Move the slide to the left for (-) or less contrast. Move the slide to the right (+)
or more contrast of the printed image. Study the image (on the right) to determine correct contrast.
Gamma (Default, 0%): Move the slide to the left for (-) or less gamma. Move the slide to the right (+)
or more gamma of the printed image. Study the image (on the right) to determine correct gamma.