6 selecting the undefined area(s), 7 defining the area to activate the card grid – HID HDPii Plus User Guide 2.0 User Manual

Page 61

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0

December 2012

Page 61 of 103

3.14.6 Selecting the Undefined Area(s)

Step

Procedure

Select the

Undefined Area(s) option to print the resin black (K) Panel for all black found only in the

space outside the areas defined, as shown below.

•

The card image becomes black with the grid and one area (available for the User to start with).

•

The defined area does not print black with resin.

3.14.7 Defining the Area to activate the Card Grid

Step

Procedure

Select on the appropriate

Defined Area (see below) to activate the card grid in the upper half of the

window.

•

It is through this card grid that up to five areas can be defined, as shown below.

•

When the card grid is first activated, then a small black square will appear at its default size of .2

x .2 (5mm x 5mm) and at its default location in the lower left-hand corner (0,0). (

Note: This

square represents the first defined area.)

3.14.8 Selecting the Print YMC under the K and Print K Only options

Step

Procedure

Use the

Defined Area function.

a. Define another area by clicking on the

Defined Area. (Note: Another .2 x .2 (5mm x 5mm)

area will appear in the lower left-hand corner. This is the location in which all newly defined

areas will first appear. Up to 5 areas can be defined.)

b. Delete an area by selecting the area and clicking on the

Delete button. (Note: If all areas are

deleted, the K Panel Resin options will automatically be deselected.)

Select the

Print YMC Under K option to print all black in the designated Defined/Undefined areas with

the Yellow (Y), Magenta (M) and Cyan (C) Ribbon Panels directly beneath the resin black (K) Panel.

(

Note: Select this option if printing resin black text or barcodes onto a colored background to provide a

more gradual transition between the two.)
OR
Select the

Print K Only option to print all black in the designated Defined/Undefined areas only with

the resin black (K) Panel or to print resin black onto a white background to maximize the sharpness of

printed text and barcodes.