Vaisala viewLinc 4.3 - Manual (Page 62)

Templates
54 4 | 4 M211679EN-A
combined time delay does not interrupt your alarm notification
requirements.
Send email to: Enter one or more addresses that are not pre-
configured in viewLinc. Separate multiple email addresses with
commas.
IMPORTANT: If you enter a preconfigured viewLinc User’s
email address in the Send email to field, viewLinc ignores
assigned schedules.
User List: Click in this field to open the Group/User Selection
window, then drag viewLinc Users or Groups across to the
Selected Groups/Users
column. You can reorganize the list
order using the arrow buttons, for easier display. Click OK.
Repeat email notification: Choose an appropriate interval for
the frequency emails are resent while the condition still exists.
You may want to use the Maximum Number of Repeats field
to specify a maximum number of repeat emails that should be
sent (enter zero, 0, to allow infinite repetition).
Notify.... : Select the corresponding check box to send an email
when an alarm is acknowledged, or when the condition no
longer exists.
6 To trigger a command on the viewLinc Server, on the Noti-
fications tab click Add , and then select Add Command
Notification . Complete the following fields:
Delay before running first notification command : To specify a
delay before the command runs, enter a delay period in hours
and/or minutes (HH:MM).
Note: If you have set the Delay Before Activating Alarm
option (on the General Parameters tab), ensure the com-
bined time delay does not interrupt your alarm noti-
fication requirements.
Run command text fields: Enter DOS commands to run dif-
ferent commands when an alarm is triggered, a notification is
repeated, an alarm is acknowledged, or an alarm condition is no
longer true.