Vaisala viewLinc 4.3 - Manual (Page 106)

Viewing Devices and Hosts
98 4 | 4 M211679EN-A
• Description : Enter a short Device description (maximum
16 characters for Vaisala Veriteq Devices only). viewLinc
allows you to edit a Vaisala Veriteq Device description
(maximum 16 alpha-numeric characters stored within the
Device), as well as its alias (maximum 64 alpha-numeric
characters, not stored within the Device). You can only
edit a 300 Series Transmitter alias in viewLinc.
• Alias : Enter a more descriptive Device description, if
needed (maximum 64 characters). The Alias is used
instead of a Description, if the option is set up in system
settings (see “Device and Channel Aliases ” on page 26).
For 300 Series Transmitters, you can also specify:
• Alias : A more descriptive Device description, if needed.
• Timeout : Specify the number of seconds to wait for data
before canceling a transmission.
• Disconnect After Scan : Choose whether you want the
Device to disconnect automatically after scanning.
• Sample Rate : The frequency that data samples are saved
to the Transmitter.