Work with ink cartridges, Information on ink cartridges and the printheads, More information, see work with ink cartridges – HP Officejet Pro 8500A User Manual
Page 87: 8work with ink cartridges
8
Work with ink cartridges
To ensure the best print quality from the printer, you need to perform some simple
maintenance procedures. This section provides guidelines for handling the ink
cartridges, instructions for replacing the ink cartridges, and aligning and cleaning the
printhead.
This section contains the following topics:
•
Information on ink cartridges and the printheads
•
Check the estimated ink levels
•
•
Information on ink cartridges and the printheads
The following tips help maintain HP ink cartridges and ensure consistent print quality.
•
The instructions in this user guide are for replacing ink cartridges, and are not
intended for first time installation.
•
If you need to replace an ink cartridge, wait until you have the new ink cartridge
available to install before removing the old cartridge.
CAUTION: Wait until you have a new ink cartridge available before removing
the old ink cartridge. Do not leave the ink cartridge outside of the printer for an
extended period of time.
•
Keep all ink cartridges in the original sealed packages until they are needed.
•
Store ink cartridges in the same orientation packages hang on store shelves or, if
out of box, with label facing down.
•
Be sure to turn off the printer properly. For more information, see Turn the printer off.
•
Store ink cartridges at room temperature (15-35° C or 59-95° F).
•
You do not need to replace the cartridges until you are prompted by the printer.
•
A significant decrease in print quality might be caused by a clogged printhead.
Possible solutions include cleaning the printheads. Cleaning the printheads uses
some ink.
•
Do not clean the printheads unnecessarily. This wastes ink and shortens the life of
the cartridges.
•
Handle ink cartridges carefully. Dropping, jarring, or rough handling during
installation can cause temporary printing problems.
•
If you are transporting the printer, do the following to prevent ink leaking from the
printer or other damage from occurring to the printer:
ƕ
Make sure you turn off the printer by pressing
(Power) button. The printhead
assembly should be parked on the right side of the printer, in the service
station. For more information, see Turn the printer off.
ƕ
Make sure you leave the ink cartridges and printheads installed.
ƕ
The printer must be transported sitting flat; it should not be placed on its side,
back, front, or top.
Work with ink cartridges
83