HP Secure Key Manager - Manual (Page 99)

Figure 16 Viewing the Create Backup: Backup Settings section
The following table describes the components of the Create Backup: Backup Settings section.
Table 4 Create Backup: Backup Settings section components
Description Components
Enter a name for the backup file. For backups stored externally, the backup filename
is created by appending _0_bkp to the backup name. For large backups, the zero is
incremented by 1 for each additional file. For example, backup foo could consist of
two files: foo_0_bkp and foo_1_bkp.
Backup Name
Enter a short description for the backup. Backup Description
Enter a password for your backup configuration.
CAUTION:
The backup configuration cannot be restored without this password.
Backup Password
Confirm the password for your backup configuration.
Confirm Backup
Password
Specify the destination information. The backup configuration can be stored internally
on the SKM, downloaded to a browser, or copied to another machine via FTP or SCP.
If you are creating this backup in anticipation of doing a software upgrade immediately
after, we recommend that you store the backup file externally. If you download the
backup configuration to a browser, the backup configuration is encrypted and
downloaded to your local machine. You must specify a name for the file; however, it
is not necessary to specify an extension for the file. If you select FTP or SCP to copy the
backup configuration to another machine, you must provide the following:
• the destination host.
• the name of the file on the destination host. The file name can contain path inform-
ation.
• the username of the account on the destination host.
• the password for the user account on the destination host.
Destination
Click Backup to create the backup. Backup
Click Back to return to the previous section. Back
Secure Key Manager 99