HP Secure Key Manager - Manual (Page 293)

show clientevent log – view the client event log.
hostname# show clientevent log Syntax
• clientevent log rotate
• no clientevent log
• transfer clientevent log
Related com-
mand(s)
transfer clientevent log – transfer a client event log off of the SKM.
hostname# transfer clientevent log
Please pick one of the following types of transfer:
1) FTP 2) SCP
Transfer Type (1-2):
Enter the host:
Enter the directory:
Enter the username:
Enter the password:
Success.
Syntax
• clientevent log rotate
• no clientevent log
• show clientevent log
Related com-
mand(s)
Device reset and restore commands
reset factory settings – delete all information stored in the SKM and reset it to its original factory
setting.
CAUTION:
This command deletes all configuration information and any installed patches and upgrades. We
recommend contacting customer support prior to using this command.
NOTE:
For security purposes, this command can only be run from the CLI at the console.
You cannot execute this command remotely via the CLI over SSH or from the
Management Console.
hostname (config)# reset factory settings
Syntax
• zeroize all keys
Related com-
mand(s)
restore default configuration – return the SKM to the default configuration.
CAUTION:
This command deletes all configuration information, while leaving all installed patches and activated
features intact. We recommend contacting customer support prior to using this command.
Secure Key Manager 293