HP Secure Key Manager - Manual (Page 215)

Description Component
This password is used to create the secret key that performs the encrypt and decrypt
operations on the data shared between the agent and the NMS. The priv password
must be between 8 and 64 characters.
NOTE:
If you select the auth, priv security option and you enter a valid value in the Auth
Password field, and leave the Priv Password field blank, the value you entered in
the Auth Password field is used for the Priv Password as well.
Priv Password
• Enterprise: Contains caching, SSL, CPU utilization, and operational statistics and
defines traps.
• Standard: Also known as MIB–II, the standard MIB contains information on network
interface utilization, system health, and statistics for IP, TCP, ICMP, UDP, and SNMP.
MIB Access
Click Edit to change any of the values associated with a username, such as the security
level, the authorization protocol, the passwords, or the MIB access for the username.
Edit
Click Add to add a username to the SKM. Add
Click the Delete to remove a username from the SKM. Delete
SNMP Management Station List
The SNMP Management Station List provides a view of all the management stations configured on
the SKM. You can think of the SNMP Management Station List as the place where you specify the
management stations where traps should be sent from the HP SNMP agent.
Figure 121 Viewing the SNMP Management Station List section
The following table describes the components of the SNMP Management Station List section.
Table 102 SNMP Management Station List section components
Description Component
The SNMP version used on the NMS. All three versions of SNMP are supported on the
SKM.
Manager Type
Specifies whether this NMS is configured to receive Trap of Information messages.
NOTE:
We recommend that you always use Inform messages.
Trap Type
The hostname or IP address of the NMS. Hostname or IP
Port on which the NMS is listening for SNMP traffic. The default is 162. Port
Secure Key Manager 215