HP Secure Key Manager - Manual (Page 103)

Figure 20 Viewing the Services List section
The following table describes the components of the Services List section.
Table 8 Services List section components
Description Components
• KMS Server: the “brains” of the SKM, which manages all incoming and outgoing
connections (both secure and clear text). When disabled, the SKM cannot be used
to fulfill requests.
• Web Administration: When enabled, the SKM can be configured through a web
browser.
• SSH Administration: the remote Command Line Interface (CLI) administration tool.
When enabled, the SKM can be configured using the remote CLI using SSH.
• SNMP Agent: When enabled, the SKM sends alerts over the network to monitor
system activity.
Name
Current activity status of the service type, either started or stopped. You control the status
by clicking Start or Stop.
Status
The state of each of the services after the SKM boots up. Startup
Click Start to start a service. The status column of the Services List section displays
“Started” in the status column for the affected service type.
Start
Click Stop to a service. The status column of the Services List section displays “Stopped”
in the status column for the affected service type.
Stop
Click Enable Startup to specify that a service should be enabled on startup. Enable Startup
Click Disable Startup to specify that a service should be disabled on startup. Disable Startup
Click Refresh to refresh the values on this section. Refresh
Restart/Halt
Use the Restart/Halt section to either shutdown or reboot the SKM.
Secure Key Manager 103