HP Secure Key Manager - Manual (Page 73)

2. Navigate to the NTP Settings section of the Date & Time Configuration page (Device > Date &
Time).
3. Click Edit.
4. Select Enable NTP.
5. Enter the IP addresses of the NTP in the NTP Server fields.
6. Specify the frequency with which the SKM will poll the NTP server(s). If you enter a value that is
not a multiple of 5, the SKM will round down to the nearest multiple of 5.
7. Click Save.
Manually synchronizing with an NTP server
The SKM will automatically synchronize with the NTP server according to the Poll Interval value
indicated in the NTP section.
To manually synchronize with an NTP server:
1. Log in to the Management Console as an administrator with Network and Date/Time access
control.
2. Navigate to the NTP Settings section of the Date & Time Configuration page (Device > Date &
Time).
3. Click Synchronize Now.
IP authorization procedures
Specifying which clients can connect to the SKM
The IP authorization feature enables you to control which clients can connect to the SKM and what
services they can access.
To specify which clients can connect to the SKM:
1. Log in to the Management Console as an administrator with Network and Date/Time access
control.
2. Navigate to the Allowed Client IP Addresses section of the Network Configuration page (Device
> Network > IP Authorization).
3. Click Add.
4. Enter a single IP address, a range of addresses, or a subnet in the IP Address, Range, or Subnet
field.
5. Select the services that will be available to this client using the KMS Server, Web Administration,
and SSH Administration fields.
NOTE:
You can grant access to various features but you cannot explicitly deny access to a specific
client. In the event that a specific IP is listed individually
and as part of a group, that IP
address acquires the sum of listed permissions.
6. Click Save.
Secure Key Manager 73