HP Secure Key Manager - Manual (Page 108)

Figure 25 Viewing the Refresh Page section
The following table describes the components of the Refresh Page section.
Table 13 Refresh Page section components
Description Component
Specify the refresh rate of the System Statistics page. Available refresh intervals are:
• Never (default value)
• 5 seconds
• 15 seconds
• 30 seconds
• 60 seconds
• 2 minutes
• 5 minutes
NOTE:
This value is only valid while you are viewing the System Statistics page. If you
access another page on the Management Console and return to the System
Statistics page, the value returns to Never.
Refresh Every
Click Set Refresh Time to apply the new value. Set Refresh Time
Click Refresh Now to refresh the System Statistics page on demand. Refresh Now
Power Supply Status
The Power Supply Status section provides information on the status of the power supply to the SKM.
Figure 26 Viewing the Power Supply Status section
The following table describes the components of the Power Supply Status section.
Table 14 Power Supply Status section components
Description Component
The status of each power supply is represented on a different line for each power supply.
The following states apply:
• Operational: The power supply unit is operational.
• Not receiving power: No power is supplied to the power supply unit. The system issues
a warning stating that “A power supply is not plugged in or is malfunctioning.”
• Removed or damaged: The power supply unit has been removed from the SKM. The
system issues a warning stating that “A power supply has been removed or damaged.”
Power Supply
Maintaining the SKM 108