HP Secure Key Manager - Manual (Page 216)

Description Component
Displays either the management community or username. The management community
is used to send SNMP data to the SNMPv1/v2 management stations. The manager
community is used by SNMPv1/v2 management stations to filter SNMP traps and is not
related to the agent community name. The Manager Community name cannot exceed
64 characters. The username is used to send SNMP data to SNMPv3 management sta-
tions. The username is used to create a key that is shared by the agent and the NMS.
Management Com-
munity or User-
name
Click Delete to remove a selected NMS from the SKM. Delete
Click Properties to view the extended properties of an NMS. From the properties page,
you can edit any of the values associated with the NMS.
Properties
SNMP Management Station Properties
The SNMP Management Station Properties page allows you to view and modify the extended properties
of an NMS defined on the SKM.
Figure 122 Viewing the SNMP Management Station Properties section
The following table describes the components of the SNMP Management Station Properties section.
Table 103 SNMP Management Station Properties section components
Description Component
The SNMP version used on the NMS. All three versions of SNMP are supported on the
SKM.
Manager Type
Specifies whether this NMS is configured to receive Trap of Information messages.
NOTE:
We recommend that you always use Inform messages.
Trap Type
The hostname or IP address of the NMS. Hostname or IP
Port on which the NMS is listening for SNMP traffic. The default is 162. Port
Name that is used to send SNMP data to the SNMPv1/v2 management stations. The
manager community is used by SNMPv1/v2 management stations to filter SNMP traps
and is not related to the agent community name. The Manager Community name cannot
exceed 64 characters.
Management Com-
munity (v1/v2 only)
Using the Management Console 216