HP Secure Key Manager - Manual (Page 306)

• no ip address
Related com-
mand(s)
ip name–server – add a domain name server.
hostname (config)# ip name-server ...
NOTE:
You can add multiple DNS servers by executing one command.
Syntax
• no ip name-server
• show hosts
Related com-
mand(s)
no gateway – set no default gateway.
hostname (config)# no gateway
For example:
hostname (config)# no gateway 2
Syntax
• gateway
• show gateway
Related com-
mand(s)
no ip address – delete an IP address from the network settings of the SKM.
hostname (config)# no ip address Syntax
• ip address
• show interface ethernet
• show interfaces
Related com-
mand(s)
no ip authorization allowed – delete an IP address from the list of authorized IP addresses.
NOTE:
The no ip authorization allowed command requires that you provide the index number
of the IP address you want to edit, rather than the actual IP address itself. You might
find it helpful to use the show ip authorization allowed command to find the
appropriate index number.
hostname (config)# no ip authorization allowed 3
IP successfully removed.
Syntax
• edit ip authorization allowed
• ip authorization
• ip authorization allowed
• show ip authorization
• show ip authorization allowed
Related com-
mand(s)
no ip name–server – delete a domain name server from the SKM.
hostname (config)# no ip name-server ... Syntax
• ip name-server
• show hosts
Related com-
mand(s)
Using the Command Line Interface 306