HP Secure Key Manager - Manual (Page 294)

NOTE:
For security purposes, this command can only be run from the CLI at the console.
You cannot execute this command remotely via the CLI over SSH or from the
Management Console.
hostname (config)# restore default configuration
Syntax
None
Related com-
mand(s)
zeroize all keys — delete all keys from the SKM and irrevocably remove all key bits from your system.
CAUTION:
No key will be recoverable after using this command. Device configuration will remain intact. We
recommend contacting customer support prior to using this command.
NOTE:
This command will only remove keys from the local device. To zeroize keys from an
entire cluster, you must run the zeroize all keys command on each cluster member.
hostname (config)# zeroize all keys
Are you sure you want to continue? [n]:y
Are you REALLY sure you want to continue? [n]:y
All keys have been successfully zeroized.
Syntax
None
Related com-
mand(s)
Diagnostic commands
host run – look up the host specified using the domain server.
hostname (config)# host run Syntax
• traceroute run
• netstat run
• ping run
Related com-
mand(s)
ping run – send ICMP ECHO_REQUEST packets to the specified network host.
hostname (config)# ping run Syntax
• host run
• traceroute run
• netstat run
Related com-
mand(s)
netstat run – generate a list of all active connections on the SKM.
hostname (config)# netstat run Syntax
Using the Command Line Interface 294