HP Secure Key Manager - Manual (Page 38)

5. Follow the prompts to enter the necessary information:
TIP:
Press Enter to accept the default.
a. Admin account password. The Security Officer will use the admin account to configure the
SKM appliances and clustering.
b. Time zone
c. Date
d. Time. The time is based on a 24–hour clock. There is no a.m. or p.m. designation. For
example, 1:20 p.m. is 13:20:00.
e. IP address of the SKM appliance. The appliance must have a static network address, it
cannot obtain an IP address through DHCP.
f. Subnet mask
g. Default gateway
h. Hostname, including the domain. For example, skm.example.com .
The screen displays the information you entered and the message "Is this correct? (y/n):
i. If the information displayed is correct, enter y; if not enter n and make the necessary
corrections.
j. Web interface port number. HP recommends using the default port number 9443.
After the configuration settings are saved, a log-in prompt displays.
Configuring the system 38