HP Secure Key Manager - Manual (Page 320)

hostname (config)# edit ras settings
Available IP addresses:
1. All
2. 192.168.200.195
Web Admin Server IP [192.168.200.195] (1-2): 2
Web Admin Server Port [9443]: 9443
Web Admin User Authentication (y/n) [n]: n
Available IP addresses:
1. All
2. 192.168.200.195
SSH Admin Server IP [192.168.200.195] (1-2): 2
SSH Admin Server Port [22]:
Syntax
• show ras settings
Related com-
mand(s)
hostname – define the hostname of the SKM.
hostname (config)# hostname Syntax
• show hostname
Related com-
mand(s)
no ntp server – delete an NTP server.
hostname (config)# no ntp server Syntax
• show ntp
• ntp
• ntp synchronize
Related com-
mand(s)
ntp – set the NTP values for the SKM.
hostname (config)# ntp
Enable NTP [y]:
NTP Server 1 [None]:
NTP Server 2 [None]:
NTP Server 3 [None]:
Poll Interval (min) [30]:
NTP settings successfully saved
Syntax
• show ntp
• no ntp server
• ntp synchronize
Related com-
mand(s)
ntp synchronize – immediately synchronize the clock on the SKM against the NTP server.
hostname (config)# ntp synchronize Syntax
Using the Command Line Interface 320