HP StorageWorks XP Remote Web Console Software - Manual (Page 96)

Figure 63 Port Panel when iSCSI is Selected
.
The displayed items in the Port panel are as follows:
• The SLPR drop-down list allows you to display the information on a particular SLPR. Storage partition
administrators can only view the information relevant to their storage partition.
• The Type drop-down list allows you to select a port type. Only information on the selected port
type is displayed in the Port list. One of the following ports can be selected:
• Fibre: Only information on the fibre ports is displayed.
• iSCSI: Only information on the iSCSI ports is displayed.
• NAS: Only information on the NAS ports is displayed.
• The Port list provides information on the port that is selected using the Type drop-down list. For
more detailed information about the displayed items, see the HP StorageWorks XP LUN Configur-
ation and Security Manager User Guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP
200 Storage Virtualization System. Following are the displayed items for each port type:
• The following items appear when Fibre is selected in the Type drop-down list:
SLPR: SLPR number and SLPR name.
Port Name: Port name.
Type: Type of fibre port is displayed.
Host Speed: Data transfer speed for Fibre Channel ports, in Gbps (Gigabits per second)
Addr. (Loop ID): Address and Loop ID of port
Fabric:Enable indicates that a Fabric switch is being used.Disable indicates that a Fabric switch
is not being used.
Connection: Indicates the topology. FC-AL is Fibre Channel - arbitrated loop. P-to-P is point to
point.
Attribute: Port attribute.Initiator, Target, RCU Target, or External is displayed.
Performing XP Remote Web Console Operations 96