HP StorageWorks XP Remote Web Console Software - Manual (Page 67)

Figure 43 Partition Status List
.
The Partition Status list displays the following information for the selected product option:
• SLPR Name: The storage logical partition name
• Used Volumes: The amount of licensed capacity that is currently being used
• Status: The volume status, which is determined by comparing the allocated licensed capacity
(Permitted Volumes) and used licensed capacity (Used Volumes):
• Installed: License capacity for this option has been allocated to the SLPR. If the license capacity
is limited, this indicates that the partitioned licensed capacity is allocated to the SLPR and the
allocated licensed capacity is more than the capacity of Used Volumes. A storage partition
administrator can use the product in the allocated SLPR.
• Not Installed: No license and licensed capacity for the selected product are allocated to the
SLPR.
• Capacity Insufficient: The licensed capacity that is allocated to the SLPR (Permitted Volumes)
is less than the currently used licensed capacity (Used Volumes). When the trial period still re-
mains, the number of remaining days is displayed in parentheses.
• Permitted Volumes: Displays nothing when a product option with unlimited licensed capacity is
selected in the list. It displays the licensed capacity allocated to the SLPR in GB when the product
with limited licensed capacity is selected in the list.
If you select a product with unlimited license capacity, or one where the licensed capacity is not
relevant, the Setting box looks like
Figure 44 .
Figure 44 Setting Box (Licensed Capacity Unlimited or Not Relevant)
.
• The Enable button enables the license key for the selected product.
• The Disable button disables the license key for the selected product.
If you select a product with a limited license capacity, the Setting box looks like Figure 45 . This lets
you enter the licensed capacity you want to allocate to the SLPR.
Figure 45 Setting Box (License Capacity Limited)
.
• The Set button selects the setting. The selected row of the product list and the Partition Status list
change to
blue bold italics, and the displayed capacity in the Remaining Capacity field changes
to the new capacity.
XP Remote Web Console User Guide 67