HP StorageWorks XP Remote Web Console Software User Manual
Page 66
• Displays available capacity (licensed capacity)
• Displays capacity that is already being used. For example, if this column displays 10.0 TB
(2.50 TB), the licensed capacity is 10.0 TB and the capacity already being used is 2.50 TB.
NOTE:
If the size is unlimited, Unlimited is displayed.
NOTE:
Licensed capacities are calculated assuming that 1 kB = 1,024 bytes, 1 MB = 1,024 kB, 1 GB =
1,024 MB, and 1 TB = 1,024 GB.
•
Term (days) column that shows the number of days that remain before the expiration of a temporary
or emergency key.
•
Status column that shows the current status of an option:
• Installed: The option is available. The Product Name column displays the Installed icon ( ).
• Not Installed: The option is not available. The Product Name column displays the Not Installed
icon (
).
• Not Enough: The volume capacity is insufficient. The Product Name column displays the Not
Installed icon (
)
• Capacity Insufficient: The licensed capacity is insufficient because disk drives are added. The
Product Name column displays the Not Installed icon (
). Be sure to purchase enough capacity
before the license key expires.
• Expired: The license key of the option that has been in the Capacity Insufficient status has ex-
pired. The Product Name column displays the Not Installed icon (
).
• Time Out: The term has already expired for the temporary key. The Product Name column
displays the Not Installed icon (
).
The bottom section of the License Key Partition Definition panel displays the following information:
•
Total Capacity: The total licensed capacity for the selected product option. Unlimited indicates that
the licensed capacity is unlimited.
•
Remaining Capacity: The remaining licensed capacity (in GB) that is not yet allocated to any SLPR
among the whole licensed capacity for the product option that is selected in the list. When the li-
censed capacity for the product that is selected in the list is unlimited, Unlimited is displayed.
When you select a product, the Partition Status List is displayed under the information on the li-
censed capacity (see
). This allows you to click and display information regarding a
storage logical partition.
Installation Requirements and Procedures
66