Example of the audit log transfer panel – HP StorageWorks XP Remote Web Console Software User Manual
Page 107
Figure 70 Example of the Audit Log Transfer Panel
.
The Audit Log panel has the following features:
•
Output to Primary Server: You can specify whether to transfer the audit log information file to the
primary FTP server. To transfer the audit log information file to the primary FTP server, select Enable.
If you do not want to transfer the audit log information file to the primary FTP server, select Disable.
•
Primary Server Setting: You can set IP Address for the primary FTP server. As you set Output to
Primary Server to Enable, IP Address becomes available. The default has been entered for IP Ad-
dress, so change it as needed. For IP Address, you need to enter four numbers in the range of 0
to 255 (for example, nnn.nnn.nnn.nnn, where n is a number). Only enter numbers. Do not enter
the periods.
•
Primary Server Login User: You can set User ID and Password to log into the primary FTP server.
You can enter up to 256 alphanumeric characters and symbols (ASCII codes) for user ID and
password.
•
Primary Server Output Folder: You can set the folder location to save the audit log information
file. The default is the root folder (/). You can enter up to 256 alphanumeric characters and symbols
(ASCII codes) for the output folder.
•
Transfer to Primary Server: When you select the Transfer button, the audit log information file is
transferred to the primary FTP server according to the settings on the Audit Log panel. You can
transfer the current audit log information file without waiting for the audit log information file to
reach the threshold.
•
Output to Secondary Server: You can specify whether to transfer the audit log information file to
the secondary FTP server. To transfer the audit log information file to the secondary FTP server,
select Enable. If you do not want to transfer the audit log information file to the secondary FTP
server, select Disable.
•
Secondary Server Setting: You can set IP Address for the secondary FTP server. As you set Output
to Secondary Server to Enable, IP Address becomes available. The default has been entered for
IP Address, so change it as needed. The restriction for the available values is the same as that of
Primary Server Setting.
XP Remote Web Console User Guide
107