HP StorageWorks XP Remote Web Console Software - Manual (Page 148)

Description Component
Indicates the required process mode. The only mode that is currently
available is Change, which indicates adding, changing, or deleting. When
the downloaded spreadsheet file is opened, the process mode is not yet
stated.
Process mode
Function Tags
Before you write the settings, you need to state the function of the parameter. This is called a function
tag, and is formatted as a string that is in brackets ([ ]). The type and order of the function tag are
determined by the product. Function tags have the following characteristics:
• At least one function tag is required in a spreadsheet.
• The function tag must be written at the very beginning of the row.
• If a function tag is already on the current spreadsheet and does not need to be changed, it must
be deleted from the new spreadsheet so it is not processed. If the function tag remains in the
spreadsheet, and no new settings for the tag are written, the settings are processed as deleted.
[CHA], [Port] and [LDEV] tags do not support a delete operation, so if no new setting is written
for these functions an error occurs.
• Any other comments and settings written in the same row as the function tag are ignored.
• The row after the function tag indicates the required setting items (CHA and PCB Mode in the ex-
ample) for the function. The setting items are separated by commas.
• Example:
[CHA]
#CHA,PCB Mode
• The existing settings for the function are written. The existing settings row, which starts with “#$”,
is recognized as a comment row.
CAUTION:
The settings in the rows that start with “#$” are not allowed to change.
• Example:
[LUN]
#Port,HostGroup,LUN,CU,LDEV (items to be changed)
#$1C,0,1,1,1 (existing settings row)
• An example of the declaration and the function tag is as follows:
#!Version 04_00_00,LUN,Change
[CHA]
[Port]
[HostGroup]
[WWN]
[LUN]
[LDEV]
Configuration File Loader 148