Canon Color imageCLASS MF9280Cdn - Manual (Page 87)

3-4
Storing/Editing Address Book
Reg
ist
er
ing D
estina
tions in the A
ddr
ess B
ook
9
If you are finished, press the right Any key
to select .
10
Use [ ▼], [▲] or (Scroll Wheel) to select
, then press
[OK].
11
Use – (numeric keys) to enter the fax
number.
You can enter up to 40 characters for fax
number.
If you want to move the position of the cursor,
use [ ▼], [▲] or (Scroll Wheel).
If you want to delete the number or character
immediately to the left of the cursor, use [ ▼],
[ ▲] or (Scroll Wheel) to select
, then press [OK].
–
–
–
If you want to insert a pause of several
seconds, use [ ▼], [▲] or (Scroll Wheel) to
select , then press [OK]. If you insert a
pause within the fax number, the letter
is
displayed between the numbers. If you insert
a pause at the end of the fax number, the
letter
appears. When dialing an overseas
number, insert a pause after the country code,
and at the end of the fax number.
If you want to directly call an extension line
that is connected to a PBX (Private Branch
Exchange), which accepts only tone signals,
use [ ▼], [▲] or (Scroll Wheel) to select
, then press [OK].
If you want to insert a space between
numbers, use [ ▼], [▲] or (Scroll Wheel) to
select , then press [OK].
If you want to delete the entire number you
entered, press (Clear).
For information on how to set the length of a
pause, see “Communications Settings,” on
p. 13-8.
For information on how to insert a pause for an
overseas number, see “Dialing an Overseas
Number (With Pauses),” on p. 5-22.
You cannot insert a pause or a space at the
beginning of a number.
If you enter a pause at the end of the number,
the pause is always 10 seconds long. –
–
–
–
–
–
–
–