Selecting image quality, Selectng image qualty -54, Selecting image quality -54 – Canon Color imageCLASS MF9280Cdn User Manual
Page 275: Ee “selecting, Image quality,” on p. 5-54.)
Fax
5-54
Selecting Image Quality
Selecting Image Quality
You can manually select the original type according to the type of image that you are
scanning.
The default setting is
Combinations of these three modes (Text/Photo, Photo, and Text) cannot be selected at the same time. If you select one
of these modes, the previously set mode is canceled.
If you scan an original containing halftones, such as a printed image, using the
shimmering, wavy pattern) may occur. In this case, you can lessen this moiré effect by using the sharpness mode. (See
“Adjusting Sharpness,” on p. 5-92.)
If the original is a transparency, select the original type and adjust the exposure to the most appropriate level for the
original.
For details on how to send the documents, see “Basic Methods for Sending Faxes,” on p. 5-17.
–
–
–
–
1
Press
(Main Menu).
2
Use [
▼], [▲] or (Scroll Wheel) to select
3
Specify a destination.
For details about how to specify destinations, see
“Specifying Destinations,” on p. 5-30.
4
Use [
▼], [▲] or (Scroll Wheel) to
display Settings>, then press [OK].