Canon Color imageCLASS MF9280Cdn - Manual (Page 370)

Fax
5-149
Checking/Changing the Status of Fax Documents in Memory
3
Use [ ▼], [▲] or (Scroll Wheel) to select
, then press [OK].
4
Use [ ▼], [▲] or (Scroll Wheel) to select
the job whose detailed information you
want to check, then press the left Any key
to select
5
Check the details of the selected job.
■ If you want to erase the selected job:
① Press the right Any key to select ,
then go to the next step.
■ If you complete this procedure:
① Go to step 8.
You can forward the selected job to another
destination by pressing the left Any key to select
. For information on forwarding
received documents, see “Sending Documents in
Memory to a Different Destination,” on p. 5-140.
6
Make sure that the job you want to erase
is selected, then press the right Any key
to select .
To erase multiple documents from memory,
select and erase one document at a time.
You cannot erase a document that is being
printed.
If you select a document that is being received,
changes to , enabling you to
cancel receiving the document. –
–
–