Canon Color imageCLASS MF9280Cdn - Manual (Page 269)

Fax
5-48
Specifying Destinations
■ To delete the search criteria:
① Use [▼], [▲] or (Scroll Wheel) to select
the search criterion that you want to delete,
then press the left Any key to select
② Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
③ Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
7
Press the right Any key to select
Search>.
To cancel searching while the machine is
searching for your criteria, press the left Any key
to select . If the machine finds some
results before you select , these search
results are displayed.
Searching for a destination via an LDAP server
is not possible if the time setting of the server
and the time setting of the machine are more
than five minutes apart. If you cannot send
even when the user name and password are
correct, check the time settings on the server
and the machine.
The number of search results displayed will not
exceed the maximum limit set in LDAP Server> in .
(See “Network Settings,” in the e-Manual.) If the
desired destination is not displayed, either
increase the maximum number of addresses to
search, or change the search criteria.
If you select without specifying
any search criteria, all of the addresses stored
on the LDAP server are displayed.
If the Network Password Entry screen is
displayed, enter your user name and network
password, then press [OK].
The Network Password Entry screen is
displayed if either one of the following is true:
If in Server> in is set
to or 8)>, and is set to
. (See “Network Settings,” in the
e-Manual.)
If the user name, password, and domain
name specified in in
are incorrect.
(See “Network Settings,” in the e-Manual.)
–
–
–
–
–
•
•