Canon Color imageCLASS MF9280Cdn - Manual (Page 168)

Cop
ying
4-21
Adjusting Density
1
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2
Press (Main Menu).
3
Use [ ▼], [▲] or (Scroll Wheel) to select
, then press [OK].
4
Use [ ▼], [▲] or (Scroll Wheel) to
display ,
then press [OK].
5
Press the right Any key to select
.
6
Use [ ▼], [▲] or (Scroll Wheel) to select
the background setting, then press [OK].
■ If you select :
① Use [▼], [▲] or (Scroll Wheel) to select
, then press [OK].
② Press [OK], then skip to step 7.
Adjusting Base Color
This mode enables you to adjust or remove the base color of the originals.
The default setting is .