Spectra Precision Survey Pro v4.5 Recon and Nomad User Manual - Manual (Page 73)

Conventional Fieldwork
63
Data Collection Example
This section illustrates the necessary setup and usage of the Traverse
/ Side Shot screen, which is the primary screen used during data
collection. We will create a new job and manually add another point
to the job to use as a backsight. We will run in Manual Mode so the
shot data must be entered manually. This example and the following
stakeout example are the only examples that are designed where the
user should follow along and enter the values in their Survey Pro as
they are provided in the example.
Setup
1. Create a new job.
a. From the Main Menu, select File , Open / New .
b. Tap New… to open the Create a New Job
screen.