Spectra Precision Survey Pro v4.5 Recon and Nomad User Manual - Manual (Page 143)

Other Tutorials
133
5. Tap Shoot to take a side shot. Once the shot is
completed, the Results screen, shown here, will be
displayed. You are now provided with three option:
• Tap Done with SS > if you are finished taking
all Face 1 side shots for this set and continue
to Step 6.
• Tap Shoot if you want to throw out the
results for this shot and re-shoot it.
• Tap Next SS> if you want to shoot another
new side shot in Face 1. You will then repeat
Step 4 for the new point. (The label for this
button will change depending where you are
in the routine and helps guide you through
the process.)
6. Once all Face 1 side shots are completed, reverse the
scope to begin shooting the Face 2 side shots for the
current set, taking a reverse shot to the backsight
last. If additional sets are remaining, you will repeat
the process from Step 4 until all the sets are
complete.