Spectra Precision Survey Pro v4.5 Recon and Nomad User Manual - Manual (Page 17)

Getting Started
7
TDS allows access to three different SIPs. Since most of
the entries relating to surveying will require numerical
input, the numerical panel contains oversized digit
buttons for ease of use, as well as useful options such as
tab (to move between fields), enter, cut, copy, paste, etc.
While most SIPs are fixed at the bottom of the screen,
TDS Keyboard can be floated over the screen.
The TDS SIP can be moved by
dragging its grip bar.
TDS Smart SIP
The Smart SIP is available when running Survey Pro and will
automatically provide the user with the appropriate SIP when it is
needed. The SIP can also be configured to automatically open when
the cursor is inside an input field.
Enabling the Smart SIP
The Smart SIP is enabled by default, but if it has been disabled, you
can re-enable it using the following steps:
From the Main Menu, open the Job > Settings >
General screen.
Check the Use Smart Soft Input Panel Activation
checkbox.
If the Smart SIP were not enabled, the user would need
to click on the SIP icon on the taskbar to toggle the
visibility of the SIP prior to entering data.