Spectra Precision Survey Pro v4.5 Recon and Nomad User Manual - Manual (Page 123)

DTM Stakeout
113
a. All the polylines in the current job are
displayed. Select the appropriate polyline
and tap to return to the Setup DTM
3D screen.
9. If a boundary is used, you must also select one of the
two radio buttons in the Setup DTM 3D screen:
~ Exclude points…: will move any objects that occur
outside the selected boundary to the Auxiliary layer.
~ Discard the boundary…: will initially move any
points that exist outside the boundary to the Auxiliary
layer. If a point is later stored outside the boundary, the
selected boundary is automatically unselected.