Spectra Precision Survey Pro v4.5 Recon and Nomad User Manual - Manual (Page 23)

Getting Started
13
Navigating Within the Program
The starting point in Survey Pro, which appears once a
job is open, is called the Main Menu, which is shown
here. All the screens that are available in Survey Pro can
be accessed starting from the Main Menu. Likewise,
closing any screens that are open in Survey Pro will
eventually take you back to the Main Menu.
The Main Menu consists of two main areas. The upper
half of the screen contains a set of large buttons called
main menu items. The lower half of the screen contains
the submenu items that are associated with the selected
main menu item.
When a main menu item is tapped, the corresponding
submenu items will become available in the lower area.
When a submenu item is tapped in the lower area, the
corresponding screen will open. It is from these screens
where you do your work.
If a main menu item contains more submenu items than will fit on
the screen, index card-style tabs are displayed on the right. Tapping
these tabs will display additional submenu items.
The hardware keys can also be used to navigate within the Main
Menu and any other Survey Pro screen. The highlighted rectangle
displays the area of the screen that is currently active.
The bottom area of the Main Menu contains a set of icons that
perform the tasks discussed below.