Spectra Precision Survey Pro v4.5 Recon and Nomad User Manual - Manual (Page 293)

GPS Module
283
parameters. Tap Accept to finish setup and return to the
Projection screen.
8. If you set your base up on a new point, you need to tap
Occupy Control. You will be prompted to make sure your Scale
and Rotation are correct before the Control Points screen is
opened. You need to select and occupy a single control point.
When you are done, tap Accept to return to the Solve Localization
screen and the calculated coordinates are returned to the North
and East fields.
9. Tap Solve>. Examine the results and tap Accept when you are
done. You will be prompted to name the new localization site and
save the record in the database.
Remote Elevation
If you set your base on a point with known elevation, you can begin
collecting data right away. However, if your base station is on a new
point, then you should calculate the elevation of the base and create
or update a vertical site before collecting new data. This can be done
in conjunction with horizontal localization, or you can use the Remote
Elevation screen.
You can use the Remote Elevation screen to occupy a
vertical benchmark with the rover. Applying the results
of the occupation will update the base point elevation
and create a new one-point vertical localization without
entering the Solve Localization wizard. This procedure
will not effect the horizontal localization adjustment.