Spectra Precision Survey Pro v4.5 Recon and Nomad User Manual - Manual (Page 335)

GPS Module
325
Bluetooth with a Built-In Adaptor
This section describes how to configure Bluetooth and add Bluetooth
devices on data collectors that have built-in Bluetooth. If you are
using a data collector with a removable Socket Bluetooth adaptor,
refer to Page 321.
Activate Bluetooth in Windows
Bluetooth must be enabled on the data collector before it can be used.
1. Exit Survey Pro if it is running to return to the Windows
operating system.
2. From Windows, tap > Settings > Connections >
Bluetooth
> Mode and check the Turn on Bluetooth
checkbox. (It should not be necessary to check the
Make this device discoverable…
checkbox unless you
want other devices to be able to detect your data
collector for non-data collecting functions.)
Discover and Bond with New Bluetooth Devices
Before you can use any Bluetooth peripheral with Survey
Pro for the first time, the device must be paired with the
data collector.
1. Exit Survey Pro if it is running to return to the
Windows operating system.
2. Power on your peripheral hardware and be sure
Bluetooth is activated and discoverable on that
device. Also be sure you have the Bluetooth passkey available if
applicable.