Spectra Precision Survey Pro v4.5 Recon and Nomad User Manual - Manual (Page 343)

GPS Module
333
13. Select the newly-created cell phone for the Dial-Up
Connection. Enter the IP Address of Base and Port for
your VRS service provider and tap > > to
return to the Main Menu.
Windows Networking with Built-In Bluetooth
The steps below explain how to configure Windows Networking and
set up Survey Pro on a data collector that has built-in Bluetooth to
communicate with a cellular phone as a modem either via Bluetooth
or a communication cable. (If you have a data collector that uses a
removable Socket Bluetooth adaptor, refer to Page 329.)
If communicating with the cellular phone via Bluetooth, it is assumed
you have already gone through the process of discovering, adding, and
bonding with the phone as described on Page 321.
1. From the Main Menu, go to Job > Settings > Receiver.
2. With the desired remote receiver activated and selected, tap
Receiver Settings….