Spectra Precision Survey Pro v4.5 Recon and Nomad User Manual - Manual (Page 142)

User’s Manual – Conventional Mode
132
Note: When using a robotic total station and Enable Automatic
Repetition is checked in the Radial SS Settings screen, only the direct
(Face 1) shots for the first set will need to be shot manually. All
remaining shots will be performed automatically.
The Shooting Sequence is where you choose to shoot all Face 2
side shots in the same order as the Face 1 shots
(B>F1>..>Fn^F1>..>Fn>B), or in reverse order
(B>F1>..>Fn^Fn>..>F1>B).
In the Surveying Settings screen, un-checking the first four
options will keep the routine from prompting you for additional
information before storing the computed side shots.
3. Enter the Number of Sets you want to perform and
tap Shoot BS to take the Face 1 shot at the backsight
point. When finished, the Results screen shown here
will be displayed and the Next(SS D) > button will be
enabled. Tap it to continue.
Note: For optimum accuracy when shooting repetition
shots, fixed prisms should be set up over each point.
Custom Smart Targets (Page 25) will also need to be
created and selected for each prism.
4. You will now start shooting each side shot in Face 1.
Be sure the description and current smart target is
selected before shooting each Face 1 shot for the first
set. (These are remembered and will automatically
update for each subsequent shot.)