Spectra Precision Survey Pro v4.5 Recon and Nomad User Manual - Manual (Page 285)

GPS Module
275
14. When you are happy with the solution, tap Accept to set the
horizontal and/or vertical adjustment. The Adjust with Projection
wizard will open to show you a preview of the changes to the
geodetic points. Tap Accept to update the coordinate system in
the job and raw data, and to apply the adjustment to the points.
Manual Entry of Parameters
Manual entry of parameters is used when you already know the
appropriate horizontal and vertical localization parameters for a site.
Use manual entry of parameters to key in the site parameters and set
it as the current coordinate system.
1. Tap Solve Localization to open the Solve Localization wizard and
then tap Manual Entry>.
2. Enter the Scale, Rotation, Translations, and Origin of the
horizontal system.
3. Enter the Slope N, Slope E, Separation, and Origin of the vertical
adjustment.
4. Tap Solve> to show the horizontal and vertical parameters
entered.
5. Review the results and tap Accept when you are done.