Spectra Precision Survey Pro v4.5 Recon and Nomad User Manual - Manual (Page 198)

User’s Manual – Conventional Mode
188
The Surface Scan Statistics screen displays useful
information about the computed surface to be scanned,
including an estimate on how long it will take to
complete the surface scan.
8. Be sure to check the Store Pts box to store all the
points that are scanned and specify the starting
point number in the corresponding field.
9. Tap Go > to start the surface scan and open the
Surface Scan Results screen.
The Surface Scan
Results screen displays
information related to how far along
the routine is with the scan. It can be
stopped early with the Stop button.
You can tap Map to view
the Map card, which
shows all the points that
have been scanned in
green, any points that were rejected in red and the
points that have yet to be scanned in gray. (Existing
points are displayed as smaller black squares.) You can
toggle between an
X,Y View or an X,Z View.