Watlow EZ-ZONE RMH - Manual (Page 74)

Watlow EZ-ZONE ® RMH Module • 71 • Chapter 4 Setup Page
RM High Density Module • Setup Page
Display
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Parameter
ID
Data
Type
&
Read/
Write
[`Lnr]
[`Set]
Linearization Menu
[``Fn]
[ Fn] Linearization (1 to 24)
Function
Set how this function will
linearize Source A.
[`oFF] Off (62)
[intr] Interpolated (1482)
[Stpd] Stepped (1483)
Off 14388
[offset 70]
0x86 (134)
1 to 24
5
120 34005 uint
RWES
[SFn;A]
[SFn.A] Linearization (1 to 24)
Source Function A
Set the type of function
that will be used for this
source.
[nonE] None (61)
[``Ai] Analog Input (142)
[CUrr] Current (22)
[`C;Pr] Cool Power, Control
Loop (161)
[`h;Pr] Heat Power, Control
Loop (160)
[PWr] Power, Control Loop
(73)
[`Lnr] Linearization (238)
[MAt] Math (240)
[``Pu] Process Value (241)
[`SP;C] Set Point Closed,
Control Loop (242)
[`SP;o] Set Point Open, Con-
trol Loop (243)
[`uAr] Variable (245)
None 14380
[offset 70]
0x86 (134)
1 to 24
1
- - - - 34001 uint
RWES
[`Si;A]
[ Si.A] Linearization (1 to 24)
Source Instance A
Set the instance of the
function selected above.
1 or 250 1 14382
[offset 70]
0x86 (134)
1 to 24
2
- - - - 34002 uint
RWES
[`S2;A]
[ SZ.A] Linearization (1 to 24)
Source Zone A
Set the zone of the function
selected above.
0 or 16 0 14384
[offset 70]
0x86 (134)
1 to 24
3
- - - - 34003 uint
RWES
[Unit]
[Unit] Linearization (1 to 24)
Units
Set the units of Source A.
[`Src] Source (1539)
[nonE] None (61)
[`A;tP] Absolute Temperature
(1540)
[`r;tp] Relative Tempera-
ture (1541)
[PWr] Power (73)
[`pro] Process (75)
[``rh] Relative Humidty
(1538)
Source 14436
[offset 70]
0x86 (134)
1 to 24
0x1D (29)
121 34029 uint
RWES
[`iP;1]
[ ip.1] Linearization (1 to 24)
Input Point 1
Set the value that will be
mapped to output 1.
-1,999.000 to 9,999.000 °F or
units
-1,128.333 to 5537.223 °C
0.0 14394
[offset 70]
0x86 (134)
1 to 24
8
122 34008 float
RWES
[`oP;1]
[ op.1] Linearization (1 to 24)
Output Point 1
Set the value that will be
mapped to input 1.
-1,999.000 to 9,999.000 °F or
units
-1,128.333 to 5537.223 °C
0.0 14414
[offset 70]
0x86 (134)
1 to 24
0x12 (18)
123 34018 float
RWES
Note:
Some values will be rounded off to fit in the four-character display.
Full values can be read with other interfaces.
Note:
If there is only one instance of a menu, no submenus will appear.
** These parameters/prompts are available in these menus with firmware revisions 6.0 and
above.
R: Read
W: Write
E: EEPROM
S: User
Set