Watlow EZ-ZONE RMH - Manual (Page 100)

Watlow EZ-ZONE ® RMH Module • 97 • Chapter 5 Factory Page
RM High Density Module • Factory Page
Display
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Parameter
ID
Data
Type
& Read/
Write
[pas;u]
[PAS.u] Security Setting
User Password
Used to acquire access to
menus made available through
the Locked Access Level set-
ting.
10 to 999 63 - - - - - - - - - - - - - - - - - - - -
[pas;a]
[PAS.A] Security Setting
Administrator Password
Used to acquire full access to
all menus.
10 to 999 156 - - - - - - - - - - - - - - - - - - - -
[ULoC]
[FCty]
Security Setting Menu
[Code]
[CodE] Security Setting
Public Key
If Rolling Password turned on,
generates a random number
when power is cycled. If Roll-
ing Password is off fixed num-
ber will be displayed.
Customer Specific 0 - - - - - - - - - - - - - - - - - - - -
[pass]
[PASS] Security Setting
Password
Number returned from calcu-
lation found in Features sec-
tion under Password Security.
-1999 to 9999 0 - - - - - - - - - - - - - - - - - - - -
[diAg]
[FCty]
Diagnostics Menu
[``Pn]
[ Pn] Diagnostics Menu
Part Number
Display this controller's part
number.
24 - - - - 0x65
(101)
1
9
90 1009 string
R
No Dis-
play
Diagnostics Menu
Device Name
Read the device name.
EZ-ZONE RM - - - - - - - - 0x65
(101)
1
0x0B (11)
- - - - 1011 string
R
No Dis-
play
Diagnostics Menu
Device Status
Return hardware status
Fail means return to factory.
OK (138)
Fail (32)
- - - - 30 0x65
(101)
1
0x10 (16)
- - - - 1016 uint
R
[`rEu]
[ rEu] Diagnostics Menu
Software Revision
Display this controller's firm-
ware revision number.
5 - - - - 4 0x65
(101)
1 to 5
0x11 (17)
91 1017 string
R
[S;bLd]
[S.bLd] Diagnostics Menu
Software Build Number
Display the firmware build
number.
- - - - - - - - 8 0x65
(101)
1 to 5
5
- - - - 1005 signed
32-bit
R
[``Sn]
[ Sn] Diagnostics Menu
Serial Number
Display the serial number.
- - - - - - - - 12 0x65
(101)
1
7
- - - - 1032 string
R
Note: Some values will be rounded off to fit in the four-character display . Full values can
be read with another interface .
If there is only one instance of a menu, no submenus will appear .
R: Read
W: Write
E: EE-
PROM
S: User
Set